|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
UCON Vibration Controller
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Inputs |
|
|||
| Analog Channels |
Up to 16 synchronized channels for single chassis. |
|||
| Resolution |
24-bit ADC |
|||
| Voltage Ranges |
±10, ±1 or ±0.1 VPEAK |
|||
| Dynamic Range |
110 dB |
|||
| Coupling |
AC, DC, ICP, TEDS(optional) |
|||
| Maximum Input |
± 36VPEAK without damage |
|||
| Filtering |
An analog filter plus a 160 dB/ octave digital filter. |
|||
| Amplitude Accuracy |
0.08dB |
|||
| Channel Match |
Amplitude |
within 0.01dB |
||
| Phase |
within ± 0.2 degree(DC to 20,000 Hz) |
|||
| Signal-to-Noise |
> 100 dB(DC to 1,000 Hz measured with half-full-scale sine wave) |
|||
| Channel Crosstalk |
< -110 dB |
|||
| Outputs |
||||
| Analog channels |
1 Drive channel, 1 COLA channel. (optional) |
|||
| Resolution |
24-bit DAC |
|||
| Voltage ranges |
±10VPEAK |
|||
| Dynamic range |
110 dB |
|||
| Filtering |
An analog filter plus a 160 dB/ octave digital filter |
|||
| Harmonic distortion |
<-100dB |
|||
| PC Connection |
||||
| Operating System |
Windows 2000/XP/Vista |
|||
| Connectivity |
USB2.0 |
|||
| Regulatory Compliance |
||||
| Compliance |
CE Marking |
|||
| Safety |
EN 61326-1:1997, EN 61010-1:2001 |
|||
| General |
||||
| Environmental |
Temperature |
41 to 113 ℉, -10 to 50℃ |
||
| Humidity |
20% to 90% RH non-condensing |
|||
| Electrical |
AC Power |
88 to 264 Volts, 47 to 63 Hz, auto sensing |
||
| Consumption(W) |
VT-9002: 40; VT-9008: 4.25; VT-9016: 4.98 |
|||
| Dimension (mm) |
VT-9002 |
362x278x79 |
Weight(Kg) |
2.77 |
| VT-9008 |
455x355x92 |
4.25 |
||
| VT-9016 |
455x355x92 |
4.98 |
||
|
|
|
|
|
|
Based on its powerful real-time control capability and large data transmission width, UCON features flexible and scalable vibration control solution from 2 to 16 channels.
VT-9002: up to 2 input (Voltage/ICP/Charge) channels and 1 drive channel
VT-9008: up to 8 input (Voltage/ICP/Charge) channels and 1 drive channel, 1 COLA channel, with 2 digital I/O interfaces.
VT-9016: up to 16 input (Voltage/ICP) channels and 1 drive channel, 1 COLA channel, with 2 digital I/O interfaces.
TEDS is optional for Type VT-9002, type VT-9008 and type VT-9016.
Available control applications include |
|
Auxiliary applications (optional) include |
|
1 |
Random |
11 |
Profile Editor |
2 |
Sine on Random (SoR) |
12 |
Spectrum Analysis |
3 |
Random on Random (RoR) |
13 |
MATLAB Interface |
4 |
Sine and Random on Random (SRoR) |
14 |
Multi-layer Password Security System |
5 |
Swept Sine |
15 |
Automatic Drive Notching/Limiting Control |
6 |
Resonance Search Track & Dwell (RSTD) |
16 |
High Frequency Random Control (up to 18 kHz) |
7 |
Classical Shock |
17 |
High Frequency Sine Control (up to 10 kHz) |
8 |
Shock Response Spectrum (SRS) |
18 |
Low Frequency Sine Control (low to 0.01Hz) |
9 |
Transient Time History (TTH) |
19 |
Digital I/O interfaces |
10 |
Long Time History for Road Simulation (LTH) |
20 |
Multi-channel Control Strategies |
UCON is a cutting-edge vibration controller for electro-dynamic and servo-hydraulic shakers. It integrates the up-to-date of DSP technology, low noise hardware design, vibration control algorithms and data transmission protocols. UCON is also a multi-tasking system with close- loop control handled by a DSP processor and independent of PC, to ensure the efficiency of real-time control system, with timely and rapid response to tested system changes. Thus it guarantees high performance, powerful features, and safety assurance. It also provides test engineers an easy-to-use application software package.
Copyright 2014 - Vibro-Acoustic srl - PI IT04587160286 |
INDUSTRIAL
Vibration Controllers
Econ Avant: from 4 to 32 channels
Econ Premax: up to 1024 channels
